Solution of hydrocarbon resin - the appearance of the product

Finished film-forming solution

Petroleum resin solution

Liquid semi-finished binder component for paints, enamels and impregnating compounds for wood, concrete and plaster.

Finished solutionFor mixingParameters by batch

Request a certificate of analysis

FormLiquid solutionReady for dosing into the mixer

RoleFilm-formingIn the formulation

SubstratesWood/concreteAlso plaster

DocumentsBatch by batchAfter technical approval

On the product

When a ready solution works best

The finished solution allows you to exclude separate dissolution of the solid resin. Its composition and concentration should match your formulation.

Sample product Solution of hydrocarbon resin — Product illustration. The actual appearance and values are confirmed by the certificate of analysis.

Semi-finished product for mixing plants

The solution of hydrocarbon resin is intended for mixing production of paint and impregnation materials. It can be introduced into the formulation as a finished liquid part, if the type of solvent, the proportion of non-volatile substances, viscosity and compatibility are agreed. The economy is considered taking into account the content of resin and logistics, not only the price of solution per kilogram.

clarify the solvent base before sending the sample;
recalculate the formulation for the content of non-volatile substances;
Check compatibility, viscosity and storage;
We get confirmed indicators of the current batch.

Applications

For what production tasks is the product suitable

The product is especially useful for mixing sites that produce finished formulations, but do not want to lead a separate stage of dissolution of solid resin.

01 · Coatings

Paints & enamels

The finished solution is considered as part of the binder in coloured industrial coatings with a compatible solvent system.

Test: material balance, viscosity, colour, drying, gloss and storage stability.

02 · Wood

Impregnating compounds

The product can be qualified for wood impregnation when the composition, absorption and appearance of the finished surface are appropriate to the task.

In the test: absorption, uniformity, drying, colour, water resistance and odour after aging.

03 · Concrete

Impregnation of mineral bases

The solution is evaluated in compositions for concrete, plaster and other porous bases in civil and industrial construction.

In the test: depth of penetration, flow, strengthening, appearance and water absorption.

04 · Mixing

Mixing of finished solution

For small and medium-sized productions, the product can reduce the process operation of dissolution and simplify the dosing of the liquid part.

In the test: cycle time, filtration, stability, solvent loss and cost per dry matter.

Technical harmonization

Solution data required for formulation

Without a solvent base and resin content, it is impossible to correctly assess compatibility, dosage and economics.

SolventCompatibility with your system

Non-volatileProportion of non-volatile substances according to the accepted method

ViscosityAt the agreed measurement temperature

ColourPermissible influence on the finished material

StorageUniformity and warehouse conditions

SafetyLabelling and safe-handling documentation

Specification

What parameters to agree on for NPS solution

We will provide a technical description upon request. To calculate the formulation, you need a brand of resin, a solvent, the proportion of non-volatile substances and viscosity.

Indicator	Range/status	What to verify
Resin and solvent	Clarify before selection	Resin grade, solvent composition and compatibility
Mass fraction of non-volatile substances	Batch CoA	Actual value for dosage recalculation
Viscosity	Batch CoA	Method, measurement temperature and result
Colour and appearance	Batch CoA	Compliance with the requirements of the finished material
Density	Clarify if necessary	Method and actual batch value
Storage conditions and safety	On accompanying documentation	Warehouse, handling and marking requirements

Coordinate concentration, viscosity tolerance and measurement methods. The mass of the resin is calculated from the composition of the solution; non-volatile substances may include other components.

Qualification

How to check the finished solution before purchasing

Control must confirm not only the properties of the coating, but also the correctness of the material balance.

Check blend

Clarify the solvent, non-volatile substances and the indicators of the certificate of analysis.

Recalculate the dosage

Compare formulations by actual weight of resin and solvent.

Mix the sample

Check compatibility, viscosity, filtration and stability.

Test the material

Evaluate application, drying, appearance and performance properties.

Boundaries of application

When a ready solution is unsuitable

If its solvent base is incompatible with your formulation or manufacturing requirements.
If the process uses a solid resin, select the appropriate grade.
To compare the cost, recalculate the price of the resin content and take into account the solvent and delivery.
If the purchase is planned without batch documentation, safe-handling information and a laboratory test.

Request and delivery

What to send to get an accurate answer

A technical brief reduces unnecessary correspondence and allows you to prepare a quotation for the applicable product.

Technical brief

What material you produce and what equipment.
Current resin or solution, TDS and solvent system.
Required proportion of non-volatile substances and working viscosity.
Restrictions on colour, drying, odour and storage.
Volume, packaging and delivery region.

Commercial conditions

Price: Upon request after technical clarification of the product, volume and destination
Documents: Batch CoA and shipping documents
Packaging: Packaging format and unit weight are agreed when ordering
Delivery: Across Russia and the CIS; lead time and cost are calculated individually

Documentation, sample and price

Request a solution of hydrocarbon resin

Send the solvent system and the required concentration. Clarify the parameters of the available batch and arrange a sample for recalculation of the formulation.

Send a technical request

Alternatives

If solid resin dissolution is provided, compare SPS 5/9 and Piroplast-2K 10–30 in composition and purpose.

FAQ

Selection, testing and supply issues

Characteristics, tests and conditions of order.

What is a solution of hydrocarbon resin?

This is a liquid semi-finished product: hydrocarbon resin, previously dissolved for subsequent dosing in a paint or impregnated formulation.

Who benefits from the finished solution?

Mixing plants, which are more convenient to dose the finished solution and exclude a separate operation of dissolving solid resin.

What solvent is used?

The composition of the solvent is indicated in the technical description of the selected product. Request it before calculating the formulation and check compatibility with your binder.

How to compare the price with solid resin?

Compare supply costs by non-volatile content, including solvent, delivery, energy, dissolution time and losses.

Is it possible to immediately enter the solution into the current formulation?

No. First, the material balance is recalculated, then the compatibility, viscosity, storage and properties of the finished material are checked.

What information is needed in the enquiry?

You need the type of product, the solvent system, the desired concentration and viscosity, the current material, the volume and the region of delivery.